« previous next »
Pages: [1]   Go Down

Author Topic: hxt emulsion  (Read 1398 times)

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
hxt emulsion
« on: December 10, 2013, 11:23:32 AM »
Anybody using cci  hxt emulsion other than screenprintingguy. Any pros and cons?
Logged

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: hxt emulsion
« Reply #1 on: December 10, 2013, 11:38:47 AM »
just used it today for the first time on a discharge job of 30 pieces, no problems on press, but it broke down immediately at washout.  Probably wouldn't have lasted many more prints.  I exposed it for 500 light units on my 3140.  I want it to work, need to try again.
Logged
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: hxt emulsion
« Reply #2 on: December 10, 2013, 11:48:34 AM »
500 light unit means expose on 90 sceonds.
Logged

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: hxt emulsion
« Reply #3 on: December 10, 2013, 12:27:59 PM »
Wow... We have done exposure test (two) and we were probably less than half that on our 3140... That is with a pretty thick coat, I'll have to check notes.

Seemed solid, but we didn't run any prints.
Logged

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: hxt emulsion
« Reply #4 on: December 10, 2013, 12:31:54 PM »
what mesh?
Logged

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: hxt emulsion
« Reply #5 on: December 10, 2013, 01:06:50 PM »
Great question... I THINK 180-S
Logged

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: hxt emulsion
« Reply #6 on: December 10, 2013, 01:28:22 PM »
After reading all that praise in another thread, we'll give it a whirl.  Provided it makes the journey with freezing/thawing that is. 
Logged
Pages: [1]   Go Up
« previous next »