screen printing > DIY - From master engineered marvels to cobbled together jury-rigged or Jerry-built junk!
DIY Auto Rotating Flash?
screenxpress:
--- Quote from: mooseman on December 22, 2013, 10:55:42 AM ---here is another homemade flash auto rotater idea from RubeMooseberg....
never built this as I can easily reach the flash from my print station which is smack between the flash and dryer...hotter than hell but we been working it this way for years now ::).
--- End quote ---
Interesting concept but I don't think that would work well, or long.....
Looks like the pistons would activate to (rapidly) push each direction so you would have a clunk when they hit (annoying at best) and eventually incomplete pushes leaving flash hanging mid-stream or from the constant banging, eventual failure of one of the pistons or the bracket.
imo.
mooseman:
--- Quote from: Gilligan on December 22, 2013, 11:06:43 AM ---Moose, just fire off both cylinders with one foot pedal... No matter which position just smash the button.
--- End quote ---
BRILLIANT........I seem to always to cut two holes in the door one for the big dog and one for the little dag only to find the little dog uses the big dog door :o
rube.....
Northland:
or..... use one cylinder. Extended to flash, retracted to idle position.
You'd need swivel mounts on the both ends of the cylinder to allow it operate in an arc fashion.
Navigation
[0] Message Index
[*] Previous page
Go to full version