Green Galaxy...

[dirkdiggler]

Anyone tried the Meteor or the Comet?  Video looks promising and the price is right?

[Gilligan]

Used a sample of it at ISS... pretty awesome.

Still waiting on our sample though. 

[Rockers]

Awesome, I was just about to post the same question.
Has anyone been in contact with them in Canada? That`s where they are based. Apparently they are doing as well discharge inks. Ryonet stocks the white plastisol and waterbased inks as far as I have seen.

[Colin]

Just got a gallon of it this week.  Stirred it up and it feels reallllly low visc and has little to no drag.   No time yet to put it on press.  We should be doing that next week, both auto and manual.

 Looks like it could be awesome on a manual, but I am betting on it not having enough body to print well on the auto.  Also, it looks like it may not stack - print/flash/print cleanly - like it may roll the edges and fill in fine detail.  But, I could also eat my words next week

Any one have hands on experience with it yet?

Oh and Rockers, I was told that it ships in from Italy, not Canada.

[Rockers]

Just got a gallon of it this week.  Stirred it up and it feels reallllly low visc and has little to no drag.   No time yet to put it on press.  We should be doing that next week, both auto and manual.

 Looks like it could be awesome on a manual, but I am betting on it not having enough body to print well on the auto.  Also, it looks like it may not stack - print/flash/print cleanly - like it may roll the edges and fill in fine detail.  But, I could also eat my words next week

Any one have hands on experience with it yet?

Oh and Rockers, I was told that it ships in from Italy, not Canada.

I might be wrong but I took my info from their website.
http://www.greengalaxycompanies.com/story/
Well of course it does not say where it ships from;) As a matter of fact their website does not say much at all about their products, which really is a shame.

[TCT]

We have been using their ink for a while, REAL nice stuff. Kinda a different animal than your standard Union or whatever. Nice and creamy.
There was talk of it becoming readily available here in the states this coming year but I'm not 100% sure where that stands currently.

All in all, two thumbs up.

[Colin]

I had word from Nick at Ryonet that they have placed a very large order and it will be in their hands shortly, if not already.

I have a few jobs I can try it on next week, I will try and remember to post my results.

[Frog]

They have just signed up so expect some info straight from the horse's mouth, as it were.
(and yes, the IP is in Canada)

[royster13]

http://www.greengalaxycompanies.com/

[GreenGalaxy]

Hi to all following this discussion.  Yes Green Galaxy is a Canadian company! :-)  Up until recently most of our inks were manufactured in Canada.  We are now making the inks in Italy, so you are both right. :-)  Ryonet will be selling our inks in the USA I saw mention of Nick Wood, He is a great guy.  We are going to start with White inks and grow the line from there.  The goal of our company is to release great products that are user and environmentally friendly, that ultimately make printers more profits.  The white inks are 3 roll milled and the small particle size allows you to print through finer mesh and have great coverage.  The water base has incredible open time and is supper soft but can be used print flash print then it bonds to itself for some stretch.  We will be releasing more products and updating our website throughout the year.  Thanks for the interest and I hope you love the products!       

[starchild]

Hi Green Galaxy.. On your website there's a 2010 write up about your water base inks goal is to overcome a list of short comings inherent in printjng with wb inks. One of them- I think more important, is the the high dwell time to cure.. Now on Ryonet it states that 90 seconds on a higher setting is doable but 120 seconds is preferable..

Could you clarify? And is this based on convection heat or electric? Because you mainly hear the struggle with curing coming from printers with electric ovens.

Posted with Tapatalk

[GreenGalaxy]

Curing water base is a time temperature relationship.  3 min at 300 degrees F or with a higher temp you can reduce the time.  You should always test to ensure a proper curing is taking place.  We have a catalyst that can be added to the ink to create a plastisol like cure.  Forced air dryer is suggested.  However you could test to see how it works in your environment with your equipment.  Wash testing should be done after 48 hours of print test.  This catalyst is one of the upcoming products we will release. 

[inkman996]

Hi to all following this discussion.  Yes Green Galaxy is a Canadian company! :-)  Up until recently most of our inks were manufactured in Canada.  We are now making the inks in Italy, so you are both right. :-)  Ryonet will be selling our inks in the USA I saw mention of Nick Wood, He is a great guy.  We are going to start with White inks and grow the line from there.  The goal of our company is to release great products that are user and environmentally friendly, that ultimately make printers more profits.  The white inks are 3 roll milled and the small particle size allows you to print through finer mesh and have great coverage.  The water base has incredible open time and is supper soft but can be used print flash print then it bonds to itself for some stretch.  We will be releasing more products and updating our website throughout the year.  Thanks for the interest and I hope you love the products!       

Any relationship to Manoukian?

[GreenGalaxy]

No relationship with them.

[pwalsh]

Curing water base is a time temperature relationship.  3 min at 300 degrees F or with a higher temp you can reduce the time.  You should always test to ensure a proper curing is taking place.  We have a catalyst that can be added to the ink to create a plastisol like cure.  Forced air dryer is suggested.  However you could test to see how it works in your environment with your equipment.  Wash testing should be done after 48 hours of print test.  This catalyst is one of the upcoming products we will release.

In support of what Green Galaxy posted regarding required oven retention time to achieve a full cure on water-based textile screen-printing inks.  The attached example assumes the following constant factors:  A standard tee-shirt requires a minimum of 20” of linear space, two shirts are loaded across the belt, and the oven chamber length is 12.0’.  The only variables are a dwell time of 120 seconds (2 minutes), versus 180 seconds (3 minutes) resulting in a 144 shirts per hour production speed differential.

When it comes to curing water-based inks without addition of a catalyst there are three important factors that need to be covered; (1) Evacuate the moisture from the garment, (2) Evacuate the moisture from the ink, and getting the entire thickness of the ink film to the temperature required to cross link it, to achieve a full cure.  What the numbers in the example suggest is that running the dryer at the highest temperature possible without damaging the garment, or adding a catalyst that will promote a chemical cross linking of the ink film to achieve a full “post-cure” are both good strategies for the production orientated print-shop.