« previous next »
Pages: 1 ... 5 6 [7]   Go Down

Author Topic: Silicone Ink from Source One  (Read 23364 times)

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: Silicone Ink from Source One
« Reply #90 on: August 05, 2013, 02:09:04 PM »
I think that's the VOC compliant version of C-60, or trichloroethylene. 

IIRC, it's mostly acetone, some alcohol, and a bit of hydrocarbon.


Logged

Offline Dr Slomo

  • Newbie
  • *
  • Posts: 3
Re: Silicone Ink from Source One
« Reply #91 on: September 18, 2013, 04:18:57 PM »
Sorry guys for the late comeback - been a bit crazy lately.  This cleaner was mineral spirits based on the feel, did not evaporate like acetone but I can't find the gallon for the life of me.  I've used it interchangeably on my plastisol and silicone inks with great results, it had an orange smell to it.  afraid I can't give the actual product number though it was a Plastisolve product, maybe 842???
Logged

Offline cleveprint

  • !!!
  • Sr. Member
  • ****
  • Posts: 444
Re: Silicone Ink from Source One
« Reply #92 on: December 09, 2013, 11:08:23 AM »
sorry to bring up an old thread. getting a lot of our jersey work in now and i have one customer whos jerseys are 80 nylon, 20 spandex. very stretchy jerseys. anyone have experience with the silicone ink on nylon? 
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Silicone Ink from Source One
« Reply #93 on: December 09, 2013, 11:13:30 AM »
If he doesn't respond here, contact Rob Coleman at Nazdar Source One.
Logged
That rug really tied the room together, did it not?

Offline cleveprint

  • !!!
  • Sr. Member
  • ****
  • Posts: 444
Re: Silicone Ink from Source One
« Reply #94 on: December 09, 2013, 12:26:48 PM »
well to answer my own question, i cannot get it to adhere to nylon. i had some old jackets and bag panels made of nylon in the back and did some test prints. scratches right off. adheres to the poly shirts just fine.
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Silicone Ink from Source One
« Reply #95 on: December 09, 2013, 12:43:48 PM »
Just to clarify, not nylon jerseys, but rather ripstop type stuff.

Logged
That rug really tied the room together, did it not?

Offline cleveprint

  • !!!
  • Sr. Member
  • ****
  • Posts: 444
Re: Silicone Ink from Source One
« Reply #96 on: December 09, 2013, 12:55:39 PM »
i did not have any extra jerseys to test on, so i only had whatever nylon items i had laying around. not sure if the 80/20 nylon/spandex mix that the jerseys are made of would have a different result. if i can get an extra one or two from my customer, ill give them a test.
Logged

Offline Rob Coleman

  • Sr. Member
  • ****
  • Posts: 359
Re: Silicone Ink from Source One
« Reply #97 on: December 16, 2013, 12:06:47 PM »
The answer is .... it depends!  :)

Really depends upon the weave, fabric treatment etc.  The product is designed for poly's not nylons.

Out of curiosity - which product number are you testing?
Logged
Rob Coleman | Vice President
Textile Business Unit | Nazdar SourceOne | sourceone.nazdar.com
(800) 677-4657 ext. 3708 | Cell (678) 230-4463
rcoleman@nazdar.com

Offline cleveprint

  • !!!
  • Sr. Member
  • ****
  • Posts: 444
Re: Silicone Ink from Source One
« Reply #98 on: December 17, 2013, 03:07:14 PM »
We tested it on a Rox volleyball jersey. 80/20 nylon/spandex. It cured, but peeled right off. Just did not adhere. Also tested it on some nylon bag panels and Ultra Club 8925 pouch jacket and had the same result. Basically whatever I had laying around that was nylon.

Works great on the poly stuff though!
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Silicone Ink from Source One
« Reply #99 on: December 18, 2013, 09:36:24 AM »
I tried nylon as well and it failed, but on poly it's sweet!
Logged
Pages: 1 ... 5 6 [7]   Go Up
« previous next »